=head1 NAME

bos setcellname - Sets the cell's name in ThisCell and CellServDB

=head1 SYNOPSIS

=for html
<div class="synopsis">

B<bos setcellname> S<<< B<-server> <I<machine name>> >>> S<<< B<-name> <I<cell name>> >>>
    S<<< [B<-cell> <I<cell name>>] >>> [B<-noauth>] [B<-localauth>] [B<-help>]

B<bos setc> S<<< B<-s> <I<machine name>> >>> S<<< B<-n> <I<cell name>> >>>
    S<<< [B<-c> <I<cell name>>] >>> [B<-n>] [B<-l>] [-h]

=for html
</div>

=head1 DESCRIPTION

The B<bos setcellname> command establishes the cell's name and makes the
server machine named by the B<-server> argument a member of it, by
recording the value of the B<-name> argument in two files which it creates
on the local disk:

=over 4

=item *

F</usr/afs/etc/ThisCell>

=item *

F</usr/afs/etc/CellServDB>. The cell name appears on the first line in the
file, preceded by the required C<< > >> symbol.  The machine name
specified with the B<-server> argument appears on the second line along
with its IP address as obtained from the cell's naming service. The
machine is thus designated as the cell's first database server machine.

=back

=head1 CAUTIONS

Issue this command only when the installing the cell's first AFS server
machine. The I<IBM AFS Quick Beginnings> explains how to copy over the
F<ThisCell> and F<CellServDB> files from this or another appropriate
machine during installation of additional server machines.

Be sure to choose a satisfactory cell name when issuing this command,
because changing a cell's name is very complicated; for one thing, it
requires changing every password in the Authentication Database.  Consult
the I<IBM AFS Administration Guide> for advice on choosing a cell name.

=head1 OPTIONS

=over 4

=item B<-server> <I<machine name>>

Indicates the server machine on which to set the cell name in the
F<ThisCell> and F<CellServDB> file. It is always the first machine
installed in a cell. Identify the machine by IP address or its host name
(either fully-qualified or abbreviated unambiguously).  For details, see
L<bos(8)>.

=item B<-name> <I<cell name>>

Defines the cell name, using standard Internet domain name format (the
actual domain name is usually appropriate). Examples are C<abc.com> for
the ABC Corporation and C<stateu.edu> for the State University. It must
match the value of the B<-cell> argument, if that is provided.

=item B<-cell> <I<cell name>>

Names the cell in which to run the command. Do not combine this argument
with the B<-localauth> flag. For more details, see L<bos(8)>.

=item B<-noauth>

Assigns the unprivileged identity C<anonymous> to the issuer. Do not
combine this flag with the B<-localauth> flag. For more details, see
L<bos(8)>.

=item B<-localauth>

Constructs a server ticket using a key from the local
F</usr/afs/etc/KeyFile> file. The B<bos> command interpreter presents the
ticket to the BOS Server during mutual authentication. Do not combine this
flag with the B<-cell> or B<-noauth> options. For more details, see
L<bos(8)>.

=item B<-help>

Prints the online help for this command. All other valid options are
ignored.

=back

=head1 EXAMPLES

The following command defines the cell name C<abc.com> in the F<ThisCell>
and F<CellServDB> files on the machine C<fs1.abc.com> as it is installed
as the cell's first server machine.

   % bos setcellname -server fs1.abc.com -name abc.com

=head1 PRIVILEGE REQUIRED

Authorization checking is normally turned off during installation, which
is the only recommended time to use this command; in this case no
privilege is required. If authorization checking is turned on, the issuer
must be listed in the F</usr/afs/etc/UserList> file on the machine named
by the B<-server> argument, or must be logged in as the local superuser
C<root> if the B<-localauth> flag is included.

=head1 SEE ALSO

L<CellServDB(5)>,
L<KeyFile(5)>,
L<ThisCell(5)>,
L<UserList(5)>,
L<bos(8)>

I<IBM AFS Quick Beginnings>

I<IBM AFS Administration Guide>

=head1 COPYRIGHT

IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.

This documentation is covered by the IBM Public License Version 1.0.  It was
converted from HTML to POD by software written by Chas Williams and Russ
Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.
